This beautiful Willys truck was brought to us from another shop here in Phoenix. They had done a BUNCH of work, and well.. did it all wrong, causing the clutch to seize up on the way home from the shop. They called me and towed the Willys truck to us for repair. The owner of the truck came over and she was thrilled to have the truck at a specialty shop. Kim bought the truck with the lift and 3/4 ton spring on it, It has a swapped in odd fire V6, hooked to the T90A and Dana 18 with overdrive. The conversion was an old one that had no markings on it. We had a hell of a time finding the right parts, converting it to a hydraulic clutch, modifying the pedals to work, and getting everything adjusted correctly. It was a LOT of work and some good ole’ fashioned trial and error. Once that problem was solved, we found out it had the wrong spline count front axle shafts, so we fixed that,and rebuilt the brakes. We swapped in the bilstein shocks and remounted the rear shocks to a more shock friendly angle. We also rewired the truck with a modern style fuse block and HD wiring, installed a double din radio with back up camera behind the fake glove box door that is over the steering column in willys trucks. Clear coated an original worn steering wheel and installed it in place of the incorrect wheel. We plumbed in hydraulic brake locks into the system so she can lock both the front and rear brakes for parking if needed. We fully detailed the engine compartment and rebuilt many components on the truck. The final thing we did was touch up some paint areas. Kim painted the truck herself, and it is BEAUTIFUL! We just cleaned up some spots and resprayed the Jet black paint. In the end this truck ended up being a great driver, and man is it stunning. Thanks again Kim for allowing us to fix your truck so you can enjoy it.
Lisa sent down this way cool 1957 willys wagon to us. It belonged to her father, and had been sitting in a barn since 1993. The wagon had last been used in a parade, and had huge star stickers all over it and tires from the 70’s. It was apparent that it had not had much use since the 70’s. We started off replacing the fuel tank, sender, pump lines and rebuilding the carb. We have a saying at the Farm. “every jeep was parked for a reason” meaning, usually when they get parked and sit, there is a reason for that. LOTS of time was spent trying to get this old girl running, a new distributor and new timing chain was installed and she sputtered to life. A new 12 volt wire harness with HD wires and modern 6 fuse micro fuse box was installed. New tail lights, turn lights H4 conversion lights and rebuilt gauges got her electrically functioning. On the underside, we installed new leaf springs, new shocks, rebuilt the axles, rebuilt steering components, rear brakes, all new bushings and a front disk conversion. The remainder of the work was a new exhaust system, some 31×10.50×15 BFG’s and front seatbelts round out the mods. I am a lover of willys wagons, My first car at 15 was a bone yard 51 willys wagon. My father and I got it up and running and I drove that for a couple of years. Test driving this wagon brought back a slew of memories. This ole’ wagon ran and drove amazing, the flat 6 hurricane and disk brakes and radial tires makes it just cruise effortlessly. it REALLY ended up nice, we gave it a final buff to bring out what was left of the paint and Lisa and her husband are going to enjoy the heck outta this family treasure.
Justin sent down this neat but tired Grand waggy. It had some serious electrical problems and some previous owner temporary wiring solutions for seats, windows, non working gauges and more. We set about fixing all the wiring issues and in a Grand Wagoneer that’s’ no easy task. We rebuilt the factory gauge cluster and with new sending units got that all squared away. We added fuel injection, repaired some motor issues and that got it running in tip top shape. The poor ole’ jeep had a bunch of “stick on” chrome all over the lower panels. We removed all that and it took off some of the paint with it. So we repainted everything below the wood grain, we also did some other touch ups and re-cleared the hood. The tires were worn out and the owner likes the old Mickey Thompson wheels, so we polished the wheels, added some grand wagoneer center caps to the wheels and added a new set of BFG all Terrains. Once all the exterior items were finished, We turned to the interior. The burgundy/maroon interior had faded into about 6 different shades of Maroon. We installed new carpet, a new headliner, replaced the carpet at the bottom of the stock door panels, repainted a bunch of items to match and then re-upholstered the seats with a neat plaid insert. A custom center console was also upholstered to match and installed in the jeep. Justin wanted a killer stereo, so a flip up head unit was installed, with polk audio speakers and in the rear a rockford Fosgate 12″ sub and amp were custom installed into the passenger rear cargo panel. For the final touch, we custom made a roof rack for him. The cross bars were 3/4″ so that any Yakima rack product could bolt to it, bikes, cargo box, boat holders, you name it. What came in as a tired wagoneer, left with new life, Not a full restoration, but a refresh. Now she looks the part, not perfect, but a presentable usable driver with a killer interior, fuel injection and a roof rack that will let him and his wife use the wagoneer in the way it was meant to be used.
Don sent us this incredibly rusty scrambler he has had for years to restore. This poor but loved jeep, had some previous body work done in the past that was just bondo over rust. On further inspection, the frame had large rust holes in it as well. It was apparent that this resto was going to take more work than we thought.
After tearing the jeep down, we ordered a Throttle Down Kustoms framen with a HD steering box mount, rear bumper and shackle reversal. Once we had that in place, we rebuilt the axles, added rear disk brakes, a disk/disk proportioning valve, a corvette master cyl on a new booster. We had the 6 cyl fully built with a mild RV cam and more. The Jeep came with a Mopar Fuel Injection on it Don had installed years ago. It’s a great system, so we reinstalled it. That was mated to a fully rebuilt T5 with a hurst shifter. The Dana 300 was also rebuilt in house. Both axles were rebuilt with 4:10 gears and new front brakes and all new steering with a custom built box. The body was in such bad shape, we used a reproduction tub, fenders, grill, windshield frame and tailgate! The only original parts are the hood, dashboard (which we repaired holes and a cut out radio hole) hard doors and the hardtop bulkhead. Don also supplied us with a set of YJ doors which we restored and painted to match. The reproduction tub took LOTS and LOTS of work to make right, all body work and paint was done in house!!
Once the Jeep was painted back to its original Garnet red. We retextured the top in the correct “Honey” color, reupholstered the front seats and added larger boulsters to give him more support. To wrap up this cool build, I sold Don a set of factory Chrome wheels from my stash and mounted up his tires that were still in good shape. Last but not least, we restored the custom rack that Don had built for his jeep to carry his white water boats. This turned out to be one amazing driving CJ, TONS of power from the strait 6 and a LOOKER!!! Don is thrilled and enjoying his new/old Scrambler again.
John sent us this poor basket case jeep. When it showed up, it was literally a rolling frame, a 80’s v6 engine on a stand, covered in a shower curtain, a dash, 2 fenders, a hood and a grill. This Jeep is why I ask for pictures of all jeeps before they show up. LOL. But we pulled it off. It was a LOT of work, a repop tub, tailagte and windshield frame was used in this build, but the rest of the body panels are original. The axles were rebuilt, saginaw conversion utilizing the stock steering column and steering wheel. Changed the location of the 80’s ERA buick regal 3.8 v6 to move it back to where it should be, found the correct flywheel and clutch that would work with the ancient adapter, rebuilt the t90, rebuilt the Model 18 transfer case and added a saturn overdrive. The jeep has an old 2.5″ lift which we used, but removed a leaf from each pack to try and make it ride better. Some reproduction 16″ wheels have some 7.50-16 Traxxon tires mounted on them. The motor was in good shape, so we painted it in Kaiser era v6 green, added sanderson headers, HEI ignition rebuilt stock carb, new wiring with modern fuse block and HD wiring and more. All the paint and body and the Julip green paint was all done in house!! We spent close to a year tracking down the correct missing seats, had those upholstered in black sunbrella material to finish off this amazing build. The jeep is now back at home in california, enjoying weekend cruises.
I purchased this super clean and original CJ7 from its 3rd owner, 258 six with a SR4 4 speed. Jamaican tan with all its original stickers. Hard doors, hard top, AC, power brakes and steering. The jeep has 180k miles on it, however it was pulled behind an RV for 130 by its original owner. This amazing CJ has all its original paperwork including the dealer paperwork, loan info and receipts. This jeep has been garage kept and when I purchased it, the tires were brand new and 13 years old. The paint is 90% original, an area below the spare tire and around tail lights was touched up at some point in its life. The interior is in amazing shape with a very nice carpet kit. I installed some 33×10.50×15 BFG tires on the factory wheels. To do this a 4″ lift kit, HD shackles and Bilstein shocks were added as well as new 3:73 gears, a new Eaton clutchless Posi track in the rear and yukon 1 piece axle shafts. The jeep has an older Warn 8000 LB winch and some old school KC lights with vintage Yellow KC smiley face covers (soft ones). This time warp still has its original Carter carb and original exhaust and runs and drives like a dream. I have personally been using this jeep and just took it on a 3 hour highway trip in 114 deg AZ heat up into the mountains and it ran 80MPH like a dream!! This is a true 90% original jeep, with AC and a hard top jeep that I am thoroughly comfortable letting my wife drive as much as she wants! They don’t come around like this too often. I am asking $18,500.00
I purchased this amazing one owner 33k original mile 1976 Firecracker Red Cherokee Chief a couple of years ago. The jeep has a 401, TH400, and quadratrac transfer case. The jeep spent its life in California and at some point has been partially resprayed for some unknown reason. The original owner couldn’t even remember. All original interior (minus carpet), original radio and more. When I sold the jeep my customer, she wanted to add fuel injection and a small lift. So a Howell EFI unit was put on, we also installed a 2.5 Deaver lift kit and put some 33×12.50×15 BFG all terrains on powder coated stock wheels. Some new window wipes and a reseal of valve covers and oil pan and she was ready to head to the new owner. The smell and look of the original interior and feel of the 401 makes this an amazing find.
Gary and his son John reached out to me to see if we would be interested in restoring a neglected 1967 CJ5 show jeep. My ears immediately perked up. John sent me pics of a super cool vintage show jeep that had been baking in the Arizona sun for 20 years. Gary allowed all three of his sons to drive this jeep to high school!! Whaaa? man what an awesome dad! but once the boys all grew up and moved out, the jeep was left to rot beside the house…. BUT! The boys all decided to have “dads jeep” rebuilt, so their families could enjoy the jeep as they did when they were growing up. nice job guys!!! Once we received the jeep, I drooled over the TONS of vintage goodies on it. 327 Camel hump motor, T-10 4 speed, Warn overdrive, TONS of chrome, Stewart Warner green line gauges, shelby American racing wheels, and more!! Once I came to my senses…. we the torn down the poor old jeep, we began on a two year “nut and bolt” restoration on this jeep. Keeping it to as much of its original “show/hot rod” nature as we could. The jeep was originally ordered red so Gary could paint over top of the red. He wanted the jeep to look just like a factory 67 GTO color, Verduro Green. Pontiac used a red oxide primer under their green. So he purchased a red jeep, so that would be his primer!. When we did the the paint and body, we also used a red oxide primer just like Pontiac did. However we used a modern base/clear system in verduro green, instead of the single stage that it once was. The clear gives it more “POP” and its more durable. The frame was painted, axles rebuilt, we added a disk conversion to the front, rebuilt the T10 and overdrive and had RNR racing rebuild the 327 came hump back to stock specs. We added a Howell fuel injection, an MSD distributor and 6AL box and coil, redid the original exhaust with magnaflow mufflers and reinstalled Garys chrome cut-outs he had on the jeep. The jeep had two gas tanks with a manual selector valve, but with fuel injection we had to install a “ford” electrical selector valve, to make sure the fuel got returned to the correct tank. Once all the chrome parts were all “re-chromed”, we installed them all back on the feshly painted body, restitched the seats, rewired the jeep with a modern fuse box and wire harness. We were lucky that Stewart Warner decided to reproduce the “green line” gauges and those were installed in the custom dash. WOW and WOW. what a awesome jeep. The chrome and color! The 327 moves this jeep down the road in a hurry. Other than the disk brakes, BFG tires, wire harness and fuel injection, I feel like we kept to the jeeps original glory… I am super proud of the work my guys did and a BIG thank you, to Garys boys, who financed the build so that his family could grow up in the jeep, just like he did.
This particular jeep is very dear to my heart. I purchased this jeep for my 45th birthday from the daughter of its original owner. 72K original mile, Silver Arrow grey Renegade, Levis edition. This “special ordered” jeep came with a 304, T-18 manual trans, Posi rear end, tilt steering PS, PB, A/C and hardtop. When I purchased the Jeep it had been painted blue (however the floors and roll bar were still original grey), most of the interior had been replaced other then visors and door panels. I added side pipes and got into tip top mechanical shape and drove the heck outta it. My wife also loved to drive it. Matt reached out and was looking for a CJ7. Being a small business owner and having a few too many jeeps, I told him about this one… I said I will sell as long as we paint it back to original and build it like “X”. I sent him some pics of what I was thinking, and he said “HECK YEA”. so I was excited, and so was Matt. We stripped it down to metal and resprayed the Silver Arrow Grey paint in a modern base/clear combo, did a color matched bedliner on the interior and Correct blue Renegade stripes. We also found NOS levis seat material and upholstered original low back seats I had been hoarding, re-textured the hard top in white and reinstalled all the Olympic Stainless steal accessories that were on the jeep. (old school cool) The motor was in good shape, just had typical AMC valve guide issues. Fresh rebuilt heads were put on a fully detailed engine bay, (I had done clutch and brakes and axles when I owned it), redid the A/C with modern components, a Howell fuel injection unit and Davis Unified Distributor were installed for reliability. Some 33×12.50×15 BFG All Terrains were installed on some “old school” 15×10 chromies to give it that perfect vibe! We leather stitched the original steering wheel and added a Retro Radio for crusin tunes!.. What and Amazing Jeep! I am definitely jealous, It looks just like I envisioned it.. and drives amazing! The side pipes, 33’s and that color combo are just KNOCK OUT SEXY! thanks again Matt, I hope you and your family enjoy it. “IF” you ever ever sell it, I better be the first guy you call!
Todd sent us his 1953 Willys CJ-3B to be restored. This started a s a very clean, largely original “B” in primer paint with some odd 70’s chevy blazer seats. The Jeep ran decent, didnt smoke or knock. We tore the jeap down to the frame, rebuilt the axles, added disk brakes up front. painted and detailed the frame with new bushings and shackles on the springs. The motor ran pretty well, so no reason to rebuild it. We cleaned and painted the block, rebuilt the carb, all new gaskets, a new exhaust, a new clutch on resurfaced flywheel, and reseal and new fluids on the transmission and transfer case. The body required very little rust repair to get right. It was sprayed in 67 Julip Mint Metallic, the inside and under side were bedlined in matching color. Once the tub was back on the frame, we painted the wheels Dove grey, installed new tires and had to use a wheel spacer 1.25″ to clear the disk brake conversion. A modern “micro fuse” fuse box and HD wire harness was installed along with new gauges, new parking brake parts, a host of other new bits for the inside and to wrap it up a new steering wheel. The original seat frames had been cut up for the blazer seats. The owner like how they felt, so we re-upholstered them in Grey “sunbrella” type material, Rounding off the corners of the seats to give them a more vintage look. A new replacement CJ rear seat was also upholstered to match with chrome “aircraft” style seat belts in grey. There was obviously lots more work than I listed. However thats the main parts. This was a super fun build and I loved loved loved every test drive mile! the thumbs up and smiles this jeep brings is well worth the work. Thanks again Todd for allowing the Farm and crew to bring this old girl back to life.
Andrew brought us his mothers 79 Cherokee Chief to us for some work. His mother passed away and left him the family jeep he grew up in. It had been wrecked in the front when she slid off the driveway trying to avoid him and hit a tree. We sourced a new drivers fender, radiator support and other parts and repainted them to match the rest of the Jeep. We buffed out the badly faded paint to “like new” shine and repainted all the black details. A set of new “Chief” graphics a windshield, a stripped and polished bumper, and some small details were added to wrap up the outside. The original engine ran good with some coaxing back to life. We added a Howell Fuel Injection, Davis distributor, recharged the A/C system and added a Magnaflow exhaust.. Once it ran and drove good, we turned our attention to the interior and underside. New Deaver 2.5″ lift kit was installed with our own shackle reversal system. All new brake lines, brakes, freshened axles and more! A set of 33×12.50×15 BFG muds were put onto the original wheels that we had powder coated. Inside we added new carpet and full weather strip kit to freshen up the largely original interior. This was a great build. I love working with largely original Jeeps. We were able to match the paint and repair the front end damage, and with the lift, tires and exhaust it was a great cruiser! Listening to the original AM/FM radio while piloting a bright orange chief…..is well….. what its all about! Living the Jeep life! and tons of thumbs up, everywhere you go. Andrew, thanks for the business, I hope you and your “new” growing family will enjoy the jeep for years to come.
Nick brought over a VERY VERY rusty scrambler for us to restore and do an LS conversion on. I am not a big fan of the reproduction tubs, but his jeep was so rusty that there was more rust than there was metal. We tore the jeep down and began a rebuild of the drivetrain while we waited on the tub to arrive. We rebuilt the front Dana 30 axle, Upgraded the rear to a Dana 44 and rebuilt that also. The sanded and painted frame was stuffed with a 2002 Tahoe 5.3 LS motor and hooked to an AX-15 transmission. The original Dana 300 was rebuilt and hug back in the frame. A Rubicon express 4″ lift was installed with some red ploy bushings and red diff covers requested by the owner. Once all the needed work was done to the repop tub (it was a LOT), we repaired the remainder of his original steel and painted it all in the original color 1E copper. MAN O’ MAN does it pop!. The underside and interior were bedlined in color matched bedliner as well. We completely rewired the jeep, adding speedhut tach and clock, rebuilding the original speedo and volts and oil pressure gauges. The jeep was assembled with magnaflow dual exhaust, an OEM half soft top, OEM Tonnue cover, and some “jeep” mudflaps. All this stuff the owner had collected over years in anticipation for the resto. Some 33×10.50×15 wheels were mounted on restored factory wheels and custom front and rear bumpers round out this build. Thanks again Nick for trusting us with your baby and I hope you enjoy all the power that 5.3 put down!! and boy does it. SHE SCOOTS!!!
Jason sent us his 1985 CJ7 from the Florida Keys to have it restored after Hurricane Maria hit and did major damage to the Jeep. Once the jeep had arrived it was very obvious that it needed some love. Living in the salty environment, and being badly damaged in the hurricane had taken its toll on the jeep. We did LOTS of rust repair, and also had to replace the windshield, steering column and steering wheel where it had been crushed. Jason wanted a little more gumption than the stock 6 cyl had so we “built” an AMC 360, with comp cam RV cam, oiling upgrades and more, a Howell EFI and a Davis Distributor give it life! Ceramic headers, aluminum radiator, Duel Magnaflow exhaust all make that CJ move! we hooked all that to a new AX-15 transmission and rebuilt the dana 300 transfer case. Jason had swapped out the axles years ago with a set of scout Dana 44 axles, so we rebuilt them, added a shackle reversal and reused his wheels and 33″ BFG tires that came with the jeep. We completely repainted the body in the original Garnet Metallic and did a color matched bedliner under the jeep and inside. We had the original seats restitched in the correct Laredo style, and restitched the steering wheel and grab bar in genuine leather and a retro radio wraps up the inside. New Laredo graphics complete this resto/mod build. What a JEEP!! the sound of that RV cam, the colors and the stance make this one awesome Jeep. Man O’ man does it drive!!! Thanks again Jason for shipping your jeep to us for this build. I really enjoyed it! I hope you are also.
Chase reached out to us to restore and customize his 1970 first gen wagoneer. It was a driver, decent shape, but a little rough around the edges with satin black paint and a fair amount of bondo and fiberglass. We first stripped the jeep down and began to repair all the body panels, floor boards and rear quarters that were full of fiberglass. Once all the metal work was done, we pointed our attention to the drive train. We decided to ditch the old 5 lug, closed knuckle drum brake axles and swap in a set of later model waggy axles. We choose some 79 wagoneer 44’s front and rear, that gave us disk brakes and a beefier axle. To do this we had to cut all the first gen spring hangers off the frame and custom make hangers. We slung some late model 6″ springs into place and mounted up a set of custom made Detroit Steel 18″x 8″ wheels powder coated white. A set of 285/65/18 BFG AT’s and dog dish caps round out the tire and wheel package. Once the suspension was done, we swapped in a AX-15, 5 speed trans behind the original but detailed Buick 350. Hydraulic clutch conversion and a Centerforce clutch make it a very easy pedal. This was connected to the Dana 20 transfercase that we custom made a twin stick conversion for. The Jeep was painted inside and out with a custom baby blue paint with the roof being painted to match the powder coated wheels. We cleaned LOTS of trim off the tailgate, welded up the factory stereo hole in the dash and removed the factory dash pad. This being a base model waggy, we added all the stainless trim around the windows, a roof rack and more. Chase wanted a custom carpet look with the trans tunnel and more floor being exposed. So the carpet was custom made to be removed with snaps only covering the foot well area and rear floor. The factory seats were custom stitched with a mix of a Pendelton blanket (his families favorite) and black heavy vinyl. The door panels were made to match with custom mesh covering the speakers and the sub woofer in the rear quarter. The stereo is a blue tooth receiver hidden under the front seat with an AMP and all JL audio speakers and a 12″ sub in the rear. The whole jeep was rewired, Modern A/C blows through the vintage under dash unit, and a full spectrum of gauges hide in the glove box with the sub controls and USB port for charging phones.
There is SOOOO much custom work in this rig. From the custom drivetrain to hidden stereo…The above paragraph doesnt even come close to describing all the work……It really does drive like a dream. The 5 speed swap really does let it roll at 80mph without the typical Wagoneer screaming…. A/C custom stereo, custom steering box….. wow. My guys really knocked it out of the park. Chase thank you for the business and I think you and the family are gonna enjoy this ride! I know I REALLY enjoyed the test drive miles.
This amazing 1966 Wagoneer was actually one of my waggys. It was a running driving wagg, but pretty rough, painted with white latex house paint! One owner (still alive) and loads of cool documentation as well as Owners ID card… too cool! .
Peter reached out to me wanting a first generation Wagoneer. We talked about mine, and discussed buying me out of the restoration that had already begun. He decided to buy a scout and well….after a year of scout ownership, he called me again and was pleased to hear I still had it!. Being a jeep we only worked on here and there (cause it was mine) it honestly had not gotten far. Peter purchased the jeep and we got to finishing it! The 230 Tornado six ran well, so the head was rebuilt, The motor was resealed and painted. The body was removed from the frame and completely sand blasted. The frame was sanded and painted, the axles rebuilt with a disk brake conversion on the front axle. All new brake lines, rebuilt steering box, fully detailed motor, repainted wheels, coker tires, and a 1″ lift round out the under side. The body had very little rust, what was there, was cut out and new metal took its place. The bottom side of the tub was sprayed in color matched President Red bedliner. The body being completely stripped down, got 3 gallons primer, 3 gallons of President red base coat, and 3 gallons of high end clear inside and out. We repainted the dashboard and other items in the correct (custom made) champagne color. The original seats and door panels were stitched in the correct vinyl with NOS 66 wagoneer seat inert material!!! Tons of sound deadener and all new felts and rubbers seal it up tight! This Wagoneer was originally a base model. Peter wanted to “jazz it up” so we installed Stainless trim around the windows, Roof rack, and stitched the interior with the “custom” level trim. We added a NOS dash clock, Retro belt seat belts and re-wired it with a modern wire harness and fuse box. We decided to keep the 70’s added A/C unit, but made it modern with a Sandensen style compressor, dryer and condenser to make it blast cold air!
The list goes on and on, I cannot tell you all we did. 18 months, complete nut and bolt resto. BUT man what a beauty! I really gotta give a shout out to my guys, they really did a fantastic job! Restoring a first gen wagoneer isn’t for the faint of heart. Finding parts, getting creative and mustering through areas that there is no info on, is just part of it. I also need to thank Peter and Eric. Peter thanks for financing this build, being so excited about it. I hope you enjoy it tremendously!
Phillip contacted me and asked me if I would restore an XJ. Initially I said no, But when I heard the story of him wanting to build it for his fathers 60th B-day and that he wanted a early low back seat XJ. I said OK. So Phillip found a XJ and sent it to me from Oregon, it was rusty and rusty, so he looked and patience paid off when he found a correct color 1984 Pioneer with a great interior! Once that jeep had arrived at the shop we proceeded to rebuild and customize it. First off we yanked the lethargic 2.8 V6 and 3 speed auto painted the engine compartment and put in a stroked 2.8 with a 3.4 crank, massaged heads, Comp cam, edelbrock 4BBL intake, Holley 390 carb with a custom intake. The jeep did not come with A/C so we robed the system from the first XJ, using chevy blazer v6 parts for the motor we made it an A/C jeep. A Novak built 700r4 backs up to the motor with the stock 231 transfer case. We also installed a teraflex 2″ lift, Eaton E locker in the rear, magnaflow exhaust, rebuilt the axles and brakes while we were there. A custom Lokar shifter and Novak transfer case shifter fit into the original slots actuate all the gears. The 31×10.50×15 BFGs are on restored Jeep wheels and look great. The matching spare is on a Smittybuilt bumper and tire carrier and we modified the dealer installed brush guard to accept a 9500LB bulldog winch and Hella lights. The body was in great shape, only requiring a buff and minor touch ups. On the interior we installed loads of sound deadener and new carpet, new headliner, and just a good scrubbing with all new weather seals round out the Jeep.
This was a VERY cool build. it was challenging for being our first XJ and being a very early model. Some parts were hard to find, and some had to be scratch made. Don you are a lucky man! Having a son like Phillip to do this for you must be rewarding! you raised that boy right! I hope you guys enjoy this super cool, retro XJ. and thanks you for the business!
Tom sent us this cool old 59 CJ5 from Alaska. He was having a hard time finding someone up there that could do the work. He had had a “local” guy rebuild the engine, but still had issues. Once we had Toms jeep, we knew he didn’t want to mess with the original look of the jeep. I couldn’t agree more!! So we set on with a mechanical only restoration. We started by putting in a new clutch, pressure plate and resurface flywheel. We cleaned and freshened/resealed the transmission, transfer case and PTO unit. After all the was done, we rebuilt both front and rear axles, all the brakes, all the hard and soft lines, master cyl and more. The CJ is so heavy with the hardtop, PTO and plow, the springs were shot!!! We installed 4 new HD springs and shackles, all new bushings and more. One of the biggest issues with the old girl, was the body mounts were all broken off…. We rebuilt all the rear body mounts (tub side) and the mounts at the bottom of the cowl area were just gone! The Jeeps body was sitting on the bottom of the fenders. Not unusual for a jeep that’s worked for a living. After rebuilding all that, new body mounts, a set of fresh Coker tires makes her sit up proud! We also installed a new gas tank, did a LOT of wiring to make all his lights, fan, heater all work and some new seats round out this cool old jeep.
“Geronimo” contacted me and wanted help finding a early J10 or J2000/4000 pickup. We looked at some options and ended up finding this cool orange truck in California. The story gets Interesting here. So the truck came from a small ski town that was very hard to get a transport truck to. After the third or fourth attempt (different carrier companies giving up), a driver finally got his truck up there. Once he was there, the previous owner started the jeep, somehow the motor started revving at full throttle, caught fire, and they put out the fire with a garden hose…. ooops. That locked up the motor! Well….all the engine compartment was a burnt melted mess. So the truck was declined for transport, and well then it sat again. Finally finding another driver to go up there and pick it up, it made its way to Arizona. Once we received the basket case truck, we pulled the stuck motor, removed all the burnt wiring and proceeded to do rust repairs on the floor. We sold Geronimo a new hood, painted it orange (I weathered the edges to make it look older) and painted the inside of the cab at the same time. We sourced a new 401, installed that with a new clutch and pressure plate, added a Howell FI, Davis HEI distributor and headers. The owner found some cool old valve covers and Offy breathers off ebay, and those too were installed along with Modern A/C, complete rewire, new hoses, radiator and more. There are no lift kits made for the early J-trucks, so we custom made a shackle reversal, had custom springs made for the front, a lift block in the rear and added some Rancho RS7000 shocks. A disk brake kit was added to the original axles when they were rebuilt and a power brake booster to give her some killer stopping power. We turned our attention to the interior. Geronimo wanted buckets instead of the factory bench seat. We sourced some wagoneer buckets and upholstered them, the door panels, and roof panel in Military tan canvas for a durable and cool look. We had custom paint made to match the canvas, painted the dash and steering wheel once we built a cover for the stereo and dash speaker. Mounted hidden gauges and fuses for the Fuel injection in the glovebox. One of the hardest things to find was a “sorta” strait tailgate, but after a LONG search and many months we found one!. It too was painted orange, I painted the white jeep letters, and then weathered the edges like it did the hood, so it looked like a older paint. Finally we built him a 90’s style pre-runner light bar for the front that he wanted to hold his Euro spec 10″ vintage Cibie Oscars. Those will be installed once its in Germany. What a cool J2000!! the 401 is a tire spinning fool, and all the suspension work, custom made steering, make it drive great! The too cool aluminum camper shell and bright orange paint is going to STAND OUT in Germany!!! I love it!
Micah sent us his grandfathers 1981 Cherokee he inherited from The Chicago area. It was an amazing 26k mile original Jeep. However being from the Chicago area living in a damp garage, she had some rust issues on the frame and under body. His grandfather had coated the whole engine bay and under neath in a Tar like coating that actually kept the body rust free. The first task was removing all the tar like goo from everything, cleaning and sanding the frame, cleaning up and rebuilding the axles, and brakes, repainting the engine compartment in the original blue, we also fixed some “snow berm” dents in the lower rockers and repaint those. The Jeep still wears 90% of its original paint, we added a 2.5″ lift with some 31×10.50×15 BFG All terrains to the repainted factory wheels. We installed a Magnaflow exhaust, matching spare and we used most of the original interior because it was in such good shape, but tons of sound deaden-er everywhere. We added a Retro radio, 4 Polk Audi speaks and power sub woofer in the back. The motor got removed and complete reseal with new AMC blue paint, a Howell Fuel Injection, Davis Unified Distributor, modern AC components and more. What a sweet Low mileage Jeep!!! Micah flew into AZ with some buddies and road tripped the Jeep back to New Orleans where its new home is.
Dougs 43 you can see further down on my web page, we Have done LOTS of work to it in the past. Doug sent us his Willys for some more work. He had a heck of a time finding people to do basic repairs in the LA area. He decided that once it was here to go ahead and rebuild both rear springs, Rebuild the transmission, transfercase, new clutch, add a Saturn Overdrive, Complete rewire, new front seats and canvas, add a rear seat (canvas had not shipped by the time I shot the pics), We also replaced the hacked up motor plate (had been cut for a 12volt alternator to fit). and made a custom bracket to mount a Altgen (12volt alternator, that looks like a generator), painted it OD green to match the motor. We also added lights to the dash as well as some other small things. The old girl runs and drives like a dream now.
Anthony reached out to me to help him find a black Cherokee. He really only wanted Black, Not always the easiest color to find in the Full Size Jeep world, after a few months, we were able to track down a good starter. She was all original but had LOTS of rust, We tore it down and began on a long journey of metal work and paint. We replaced most all of the passenger floor board, the front part of the drivers floor, partial pcs by the rear wheel well, couple of spots in rear cargo area, both lower inner and outer quarter panels, some odd spots like inside the tail light housings. Once all the Metal work was finished, we pulled the front clip and painted the inner fenders, resealed and detailed the engine block and all its pieces, Added a Howell Fuel Injection, Modern A/C components, headers and a Magnaflow exhaust. We also installed one of our shackle reversals in the front with a 2.5″ lift spring to fit some 31×10.50×15 tires on original polished wheels. Next was the black paint! close to 300 hours are in that paint job (inside and out), Epoxy coat, primer, sealer, LOTS AND LOTS of sanding, then 5 coats of factory black base coat (but modern) and 5-7 coats of clear then LOTS of wet sanding and buffing. But boy howdy she turned out to be a looker. A new set of repop stickers, repainted badges tie it all together! We also did a new carpet kit, a strait and not cracked dash pad, headliner and detailed the original door panels and seats as best we could. The upholstery was not in the budget after all that paint work. However he will have the seats redone soon. This Jeep has a really cool door panel insert if you look closely at the pics. This turned out to be a REALLY stunning Jeep. The paint is miles deep and runs and drives awesome. Thanks again Anthony, I hope its happy in the garage with the black JK and black suburban!
Catherine sent us her super clean low mileage 77 Renegade Levis edition for us to do a “refresh”, this Jeep belonged to her father and and has been sitting in a dry Arizona barn for years! Man when I saw this jeep I tried to get her to sell it to me….. but NO WAY! LOL and I don’t blame her. Its not often we see Jeeps as original and clean as this one. It came to us with some old lift kit, side pipes, faded orange paint and some gremlins. We cleaned it up, rebuilt the suspension, lowered it back to stock, all new bushings, some HD shackles, Pro Comp shocks, SS brake lines, new 31×10.50×15 BFG’s on just cleaned up factory wheels! wow. Added Howell Fuel injection, a Davis Unified Distributor, new hoses, boiled out radiator, fan shroud and more. We cleaned and painted the under side, freshened up the axles, new brake pads and a Magnaflow exhaust make it sound throaty but not too loud. She wanted to leave the front seats alone, so we did, we replaced the chrome dash center piece with the correct black, new pull knobs and dash lights, fixed some wiring gremlins and buffed and buffed the original orange back to life. I do love a preservation especially when the body is so strait and nice!! Thanks again Catherine, “IF” you ever wanna sell….. she would look great in my garage. ! What a great Jeep and thank you for the business.
1985 Jeep CJ7 Laredo was brought to us by Greg from Alaska. He purchased this Jeep new in 1985, in Alaska, used it while working on the pipe line. A snow plow had hit the the drivers rear quarter and hard door. The jeep was faded and weathered, kinda worn out but only had 63k original miles. So we tore it down, and had to replace the entire drivers quarter panel and hard door, multiple rust spot repairs on the floors (alaska and carpet), Complete repaint inside and out. We added a Howell Fuel Injection, Davis Unified Ignition, new clutch, freshened up the axles and trans and transfer case, brakes, all hoses, belts and more. Once the fresh coat of Copper Brown Metallic was laid down, we got new Laredo stickers, polished the factory wheels and texture coated the top of the hard doors. Had the seats recovered, new carpet, some new gauges and new “Laredo” badge on the glove box. All new poly suspension, Brake lines, shocks and more make this a GREAT driving Jeep. I do love the stock feel of a original Laredo. OH and that color combo is great!
1952 M38-A1 FOR SALE.
I’ve Decided to sell my personal 52 M38-A1 to finance my wagoneer build. It has 51k original miles. I have had this for 6-8 years I think…. I believe i am the second owner (minus military). I purchased from a elderly gentleman’s family when he was in hospice. Still 24volt, all blackout lights work aside from drivers fender light, including the dash. This Jeep has the deep water fording kit (missing tail pipe extension and snorkel extension). New seat upholstery and custom bikini top made from genuine WWII canvas, husky overdrive (rare), rebuilt brakes, add-a-leaf in all 4 original springs, has kelsey hayes renegade 1 wheels with decent 33×10.50×15 bfgs. Rebuilt carb, rebuilt dual action fuel pump, new gas tank, pickup and sender and two new batterys (all within last 4 months) has rust on sides (note photos) floors solid but pass floor has typ crack. Some rust in battery box (has a plate over it) You can see all i have done, i painted everything i have touched with the correct simi OD green. The underside is in good shape, original and dirty, some of the “top hats” have rust, Everything underneath and the wheel wells are coated in a thick military under body type paint.
Runs and drives pretty damn good, haven’t taken it very far yet. Planned on using it to run around this winter, Will cruise down the road 50+ mph. Previous owner had installed aftermarket turn lights on the fron and the rear. I removed those and use hand signals. Wires are still there if you wish to put your own on. FUN jeep to drive, however……. I really want to build my Wagoneer as a “here’s what I can do” kinda rig for my business. So……. breaks my heart but something has to give. Asking $6500.00
I have a white hard top also 850.00 will fit it. Or a grey bestop supertop for it $550.00 extra if you want. I can do rust repairs if you want on the sides for a fee. But i like it the way it is! She has awesome patina, original character splashed with a mild lift and wheels and tires. I only have one original 16″ wheel with ancient bar lug tire. Will include in the sale.
Oh i have new dash plaques and mounting plate, will include in sale. Not installed yet. Originals were probably stolen during its long rest before i got it. More pics on request. Dont message me please! Text or call. 602.763.3505
Jason picked up this `1947 Willys pickup “Restored” from an online seller. Once he had received the truck, he quickly realized that it was NOT any where near restored. He called me, and being a local guy, I went over to have a look. We discussed a plan and began the work to fix up some of the atrocities that were done to the truck. Once we started this process, we realized that we either do it the right way or leave it alone. Jason being a true car guy decided to give it the full restoration. With that plan change, we decided we needed to buy another 47 pickup to get a good cab, and a frame that did not have bondo in it. Once the donor truck was purchased, we worked on this truck for almost two years! Granted it got delayed in the fact that it survived through the building of, not only my first shop, but the second one also! It was a huge challenge, finding all the hard to find early truck parts that it was missing. But wow, it turned out great. We installed new floors, a new bed floor, patches just about everywhere. Painted it in Picket grey with Normandy blue wheels and top. We also painted the shocks Normandy blue. The interior is a bit custom, the seat was upholstered out of a couch blanket that the owners wife loved. We laminated the blanket for strength and upholstered the door and kick panels in marine grade blue vinyl. The truck was completely rewired with correct woven wire and converted to 12volts. Once the truck was completely detailed and assembled we had the pinstriper come out and stripe the “W” on the tailgate and matching grey stripes on the wheels. What a restoration! Thanks for your patience Jason, Please enjoy your amazing truck
Ron sent us this Jeep to restore and build for him. This Jeep has a special place in his heart, His father found this Jeep in a sad state. His dad put the Jeep back together and the family used it for many years to go on family trips and hunting adventures. Ron and his father bonded and spent father and son time in this CJ7. When Ron’s father passed away, Ron decided it was time to resurrect his dads jeep. He had sent the jeep to a guy who sprayed on the exterior bedliner and tore the Jeep apart and then neglected to put it back together. Thats where we came in…….
Ron shipped us the Jeep and we began to make him and comfortable and reliable play and hunting rig. The motor had been previously rebuilt, so we added a Howell fuel injection, DUI ignition and wires, rebuilt both axles, all the brakes, added power brake booster, full poly suspension kit, and Procomp shocks. Complete rewire, carpet, modern A/C, new dash pulls and gauges, indicators, dash pad, Alpine stereo, memphis Audio speakers, Corbeau front seats were also installed. We had the rear seat sewn to match the fronts with material ordered from Corbeau and a Tuffy console and old school CB round out the interior goodies. Outside we installed procomp front bumper with a Bulldog 9500 lb winch, KC lights and tow bar. On the rear we did a Rockhard rear bumper tire carrier combo with 2 NATO cans and a firestick antenna. A garvin roof rackwith new flares and lights round out the exterior accessories. 31×15.50×15 cooper STT tires and Procomp wheels were the final touch on this awesome build. Ron spec’d out everything he wanted. This Jeep is now back in the hands of its Family. They are enjoying using it and remembering Harry and how much he enjoyed this CJ.
Thanks again Ron, it was a pleasure building this family jeep for you!
The Jeep Farm, LLC is VERY proud to offer this amazing 1972 Jeep J4000 Jeep pickup! It is a second owner truck, 6,000lbs gvw. 88,000 original miles. Custom cab. AMC 360 V8 and TH400 automatic. Dana 20 transfer case, Dana 60 rear with trac loc, Dana 44 front. Dual fuel tanks, 36 gallons total capacity. This truck is owned by a good customer of mine. 2 years ago I did complete floor pans, and painted the inside of the cab back to its original white. The interior still has its original seat, headliner and door panels. All the lights and gauges work, Oil and Amp lights work, including original AM radio. The original dash pad is warped and cracked. Extensive work done over the last year. Lots of new parts including a flowmaster exhaust, fuel tank, sender and lines, brake booster, master cylinder, wheel cylinders, brake lines, power steering pump, radiator and fan shroud, heater core, all rubber hoses and fluids. A brand new set of 31×10.50×15 BFG All Terrains are mounted on brand new white spoke rims. The tires have 1,000 miles on them. This is one Awesome original truck! The Blue portion of the truck seems to have been repainted at some point in its life. The truck came with an old camper top that had its own rear door, so as you can see in the pics, the tailgate is near new!! There are some small rust holes in the rear bed corners, and some bubbling at the front fender flare. The white exterior portions are original. There are dents and scratches in the hood, again please look at the pics. The tail lights, back up lights and turn indicators are all new. This is a RARE and largely original truck, and a rare opportunity to own it….
I am consigning this truck for a customer of mine that has a few Jeeps and are Jeep people. He and his family love this truck, and have put a lot of love into this truck. I have worked on this truck and have personally driven it. The motor is strong and trans shifts firm. The exhaust sounds great but not too loud. The suspension is firm, but that is too be expected of this generation of Jeep work horses. This is a VERY neat truck with a great color combo. The prices on early J-truck are climbing and if you have ever wished to own one…. now is the time.
Asking $11,500.00 Will be posting on ebay within the next week. If interested please contact me. I have the title in hand. The payment will be done through me. Direct deposit, cash or bank check. If sending a bank check will need 7 working days to clear. Once money has cleared my account, I will fed-ex the open and clear title to you. I can help arrange shipping. Please contact Michael at Priority Auto Relocations (bottom of main page of my website). he can get you a quote. Shipping payment is up to the buyer. Once payment has cleared the Jeep can be shipped or picked up. The Jeep Farm, LLC offers NO warranty, neither does the owner. This is a 46 year old original Jeep. No warranty is implied or expressed. If you wish to buy this jeep and drive it home, that is up to you. Please don’t ask me “if it will make it to, XXX” I wont answer. If you have never owned a classic Jeep, please read “Buying a classic Jeep”. Thank you for looking, any questions or offers, please contact me directly. Again I am not a dealer, I only sell Jeeps that I personally own and have driven and worked on. please call with questions 602.763.3505 Thank you.
The Jeep Farm, LLC is proud to offer this Root Beer brown Renegade for sale. We are consigning this Jeep for good customer of ours. This CJ is from New Mexico and wears a nice Root Beer Brown repaint with replacement renegade stickers. The Jeep originally had A/C however the under dash portion is gone. The nutmeg interior has seat covers over original seats. The fronts are ripped as well as the back seat. A CD player and nice speakers round out the inside. The original hard top is also included. However a wind storm (thanks Arizona) flipped it over and it has repairable damage. The suspension is a 2.5″ lift kit with Rancho shocks and HD shackles. Brand NEW 32×11.50×15 Goodyear MTR’s are mounted on stock wheels. The spare is a older BFG on stock wheel and a “jamboree rack” for holding your cooler. The front has a BRAND NEW Bulldog 9500lb winch and KC lights. Over the last couple of years we have done LOTS of work to this CJ. We rebuilt the axles with “motive” 4:10 gears, rebuilt posi trac and one piece axle shafts in the rear and front gears to match. All new bearings and seals were done in the rebuild. We also installed a Weber carb, HEI ignition, aluminum radiator and high end electric fan to make it run better and cooler in the AZ heat. The transfer case being painted silver, the way the motor runs and how clean it is, leads me to believe that it could have been rebuilt or just removed and painted when a clutch was done. No proof to this but the Jeep runs very strong and the 5 speed shifts well. This Jeep has been used off road for fun and hunting. It has scratches and dings. The drivers fender and hood was replaced at some point in life (the inside is black, not brown). Included is an older Bestop super top, the windows are scratched and foggy in places. The front floors are the worst part. Previous owner installed a insulated rubberized floor mat in the Jeep. This is a BIG NO NO…This caused the front floor boards to rust. The passenger floor board has pin holes in it, the drivers side needs a floor pan replacement. The floor is solid under the base of the roll bar footings as best I can tell. Here at the Farm we do floor replacement all the time. If you wish I can quote you the repairs and handle them here. Once done we can also paint the floors the original color, or do a color matched bedliner in Brown or Nutmeg. Aside from the floors, this is a very nice running and driving Jeep.
Will be posting on ebay and Sellajeep.com Within next two weeks. If interested please contact me. There is a clean and clear Arizona title. The payment will be done through me. Direct deposit, cash or bank check. If sending a bank check will need 7 working days to clear. Once money has cleared my account, I will fed-ex the open and clear title to you. I can help arrange shipping. Please contact Michael at Priority Auto Relocations (bottom of main page). he can get you a quote. Shipping payment is up to the buyer. Once payment has cleared the Jeep can be shipped or picked up. The Jeep Farm, LLC offers NO warranty, neither does the owner. This is a 34 year old original Jeep. No warranty is implied or expressed. If you wish to buy this jeep and drive it home, that is up to you. Please don’t ask me “if it will make it to, XXX” I wont answer. If you have never owned a classic Jeep, please read “Buying a classic Jeep” on my site.
Thank you for looking, any questions or offers, please contact me directly.
1984 Jeep CJ7 Laredo.
The Jeep Farm is proud to offer this unrestored, original paint Laredo. This jeep belongs to a customer of mine and she needs to sell it to put daughter in college. Last year (less than 500 miles ago) I put a brand new 258 6 cyl motor in it, completely cleaned and painted the engine compartment and added all new hoses, belts, wires, plugs and more. The Jeep also has a Howell Fuel Injection on it. This highly optioned CJ is equipped with and automatic transmission and dana 300 transfercase, factory A/C and hard top with bronze tinted windows.. The Jeep still wears its original paint and stickers, the hardtop seems to have been damaged at some point and has been fiber glassed, smoothed and repainted. The tub is 90% rust free and only has surface rust on front floor boards and around base of roll bar. Seems Jeeps with factory A/C and carpet always suffer from this, even original AZ Jeeps. The factory Laredo front seats are gone as is the factory carpet. There are some correct color, older aftermarket seats in front. The original rear seat is in the Jeep. (I can sand and repaint floors in original white for $1300.00, or do a Nutmeg colored bedliner in the Jeep for $750.00 if you wish, before the Jeep ships). The underneath of the Jeep is very clean and has the original dana 30 front and 20 rear with a 3″ lift kit and 33×12.50×15 Dick Cepek Fun countries on factory wheels. The spare has never been used. A previous owner has fabricated a tow bar mount under the factory front chrome bumper (we do not have the tow bar) and a 2″ receiver hitch on rear. The previous owner also replaced the speedo and tach at some point, so the mileage on the odometer is somewhere near 500 miles. When my customer titled the Jeep, AZ DMV titled it as 400 miles. SO ITS BRAND NEW!!! I am only kidding!!! original mileage is unknown, but seems by condition of Jeep, to be low. The Owner is also including a fitted car cover, 2″ receiver hitch with ball, a Chiltons Manual, Folder with all receipts, a CB radio, Bottle Jack and bin of spare parts.
I have personally worked on this Jeep and driven it. It drives very nice, engine is strong and fuel injection is perfect. With the automatic, it is not a rocket ship, but has plenty of power. The tires have plenty of tread left, but are older and getting hard, and the steering box has the usual cj play in it. (this too can be fixed before shipping for $450.00, includes a professional rebuild with a variable ratio gear installed. NOT a parts store rebuild) Aside from those simple things, she is a tight and strong CJ.
Will be posting on ebay and Sellajeep.com Within next two weeks. If interested please contact me. I have the title in hand. The payment will be done through me. Direct deposit, cash or bank check. If sending a bank check will need 7 working days to clear. Once money has cleared my account, I will fed-ex the open and clear title to you. I can help arrange shipping. Please contact Michael at Priority Auto Relocations (bottom of main page). he can get you a quote. Shipping payment is up to the buyer. Once payment has cleared the Jeep can be shipped or picked up. The Jeep Farm, LLC offers NO warranty, neither does the owner. This is a 34 year old original Jeep. No warranty is implies or expressed. If you wish to buy this jeep and drive it home, that is up to you. Please don’t ask me “if it will make it to, XXX” I wont answer. If you have never owned a classic Jeep, please read “Buying a classic Jeep” on my site.
Thank you for looking, any questions or offers, please contact me directly.
1950 M38 Military Jeep. Art is a local and brings in his jeep once or twice a year for bits and pieces.The work that we have done in the past consists of, suspension work, brakes, rebuilt steering, rebuilt parking brake, clutch and flywheel. Pressure wash and paint transmission and transfer case. Hand bent all the lines for the vacuum for wipers, axle bearings and TONS more. This past go around was probably the largest with full paint and detail on everything other than the motor. He will be back for that probably later in the year. One of the cool things we found was the numbers on the rear bumper. We found those while sanding the Jeep for paint. We duplicated what we found, albeit having no idea what they mean! Art loves to take his jeep in parades and to shows. This is not a nut and bolt restoration or even M38 “perfect” but it is the way he wants it, and it is a beautiful Jeep. We are happy to work on it for him and help bring back a piece of American history.
David sent us, this way awesome 73 CJ Renegade to build for him. He was the original owner of this CJ, lost it for a while and was able to buy it back. This complete nut and bolt, high performance Hot Rod CJ build was a blast! Starting with a clean 73 with a small block chevy conversion, we tore it down to the frame. Knowing he wanted a healthy motor in it, we Boxed the frame with dimple died panels and plated the outside of the frame with panels. We then converted the front axle to disk brakes using a 83 cj axle as a donor, used a SSBC disk brake kit for the rear Dana 44. Pulled the bearings and gears and freshened the original 4:10’s with new parts. David and I had talked about motors here and there. But when it came time to pull the trigger, boy he did! We purchased a Blue Print Racing Engines built, alum headed 383 small block. 400 HP and 420 FT LB monster goes into a Super T-10 4 spd (that was in the jeep) and the original dana 20 transfer case. Controlling this monster is a FiTech fuel injection with a “tanks, Inc” in tank pump. Edelbrock valve covers and air cleaner, with a “near chrome” powder coated intake and fan give it that show car gleam. The Hooker fender well headers were reused and powder coated in black with custom Magnaflow side pipes. The light weight Enkei wheels he had purchased in his youth were still on the Jeep, so we polished them and mounted a set of 33×12.50×15 BFG All Terrains. Around back we custom made a tire carrier/rear bumper combo with another BFG and not having a 5th Enkie, we used an American racing wheel to finish it off.
The body was for the most part clean and nice. We had to re-do the front body mounts on the tub as they had collapsed like most CJ’s from that era. The tub was sent off to have it sprayed in 2005 Dodge Patriot Blue. We did a color matched bed-liner on the bottom of the tub and on the floors. The old dash had been cut up for radios and speakers, so we filled all the holes with metal and had it sprayed at the same time. A custom polished tilt column with a LeCarra wheel is hooked to custom linkage and a rebuilt variable ratio steering box. Power disk brake booster controls the 4 wheels disk brakes with all custom bent lines and a Wilwood proportioning valve. The interior had older Steel Horse seats and the original rear seat that we recovered in modern JK materials. We also covered the rollcage and the original Renegade dash pad in the same material. Rounding out this build is a complete new wire harness, custom center console with a round marine radio and Autometer gauges.
This was a FUN build, and this Jeep is a hand full. It is Sooooo Fast and sounds rowdy!… and a BEAUTIFUL CJ.
This super cool 43 MB came to us from California. Doug purchased this Jeep and it was titled as a CJ3a (I think). Once we got it here I quickly realized that it was in fact an original military MB. The body was a replaced with a re-pop tub at some point in its life. Doug was thrilled to find this out (he loves military paraphernalia). He had us do a number of things to make it mostly “correct” without going to crazy. He did not want us to paint it, He did that himself once it got back to California. The project scope was to get her running, driving and stopping like it should. We also fully detailed the engine compartment, Painting the motor firewall and more. We re-loomed existing wires and did as much as we could without going over the top on budget. Its kinda a mix of military and civilian. We also installed new gauges, switches and more. One of the bigger tasks was to cut the side out of the jeep and replace the side panels with the correct style that has the shovel and axe cut outs. This kinda snowballed into removing part of the flat floor and putting in the correct style floor with the cut out and correct low sump style tank. You can see what we di by the NEW paint. We installed the shovel and axe, gas tank, sending unit, and added the missing tool box under the passenger seat. Going with the military theme, we cut and installed the correct black out lights but re-wired them to use standard 12v bulbs. We also rebuilt the brakes, resealed the axles and completely painted the under side in OD green. This was a fun build. and The owner finished up the OD green paint with, correct hood numbers and more. Doug now proudly Drives his Willys in parades and on the streats of LA much to the discomfort of the LAPD.
I found this wagoneer and purchased it off of its original owner in Northern Arizona. After owning it for a while Tim and Alicia contacted me and were looking for a first gen Wagoneer to add to their collection of Jeeps. They purchased this from me and we began a year long restoration. The Jeep had not been on the road or ran since 1989. Due to rust, It needed most of the floors and rear quarters. We installed all new sheet metal, then treated the rest of the Jeep to a rust dissolver . Once this was done, we sent it in to the paint shop to be completely sprayed inside and out in Modern base/clear PPG paint mixed to match the “prairie gold” factory color. Since there are no after market lift kits available for the first Gen wags and the owner had some concern about the “post style” spring mounts, we welded on all new spring hangers along with late model Wagoneer springs. We used a Superlift 2.5″ front lift spring and late model rear springs with a nice overload and a hanging (shackle flip style) rear shackle. Old Man Emu shocks round out the suspension with a set of 31×10.5×15 BFG’s on stock wheels with stock hubcaps. While underneath the Jeep we built a custom 38 gal fuel tank and skid plate, added a original “jeep” class 3 receiver hitch, All new brake lines and a all new Magnaflow Muffler and exhaust system. With the body freshly painted we installed a new windshield, all new window felts and tracks, new rear quarter rubber, door seal rubber, body mounts and more. The interior was originally a pewter color, The owner wanted that changed to black. So we repainted the Dash board, Converted the front from bench to bucket by using set of 70’s Wagoneer buckets seats, and upholstering them to look older. Using mostly marine grade vinyl with modern yet old looking insert material we made it durable yet stylish with a 60’s vibe interior. Not quite done yet, we added custom matching door panels, a custom headliner .and new carpet kit with a rubber rear cargo area matt. Mass amounts of sound deadener and custom rear quarter inserts with a light, 12V outlet and hidden compartment. finish up the interior. We also installed a Retro Radio and modern A/C parts to work with the vintage under dash unit. A complete new Wire harness and modern fuse box was installed, re-using all the original switches and plugs, and a 180amp 1 wire alternator.
I am sure there is more that I am forgetting, This was a year long major build. BUT MAN AINT SHE PURTY! Tim and Alicia did not have us do anything to the original Buck 350, axles or the 3 on the tree trans. Tim is a Diesel guy and does his own swaps, so he will be putting a 4BT Cummins, ZF 6 spd trans and JK axles. He is planning on some 17″ wheels with dog dish hub caps to round out the build. Man she is gonna be sweet when he is done.
Customer supplied custom build.
Lance contacted us to paint and clean up his 76 cj7. This project turned into a complete restoration and
customization. Starting with a very rough 76 cj7. We removed the tub and installed a YJ tub, New front
fenders, new tailgate, new YJ hardtop and yj doors and even a new (used) dashboard. Coating the entire
jeep outside, underneath and both sides of every panel! in a Kevlar based bedliner wit tan automotive
paint over the top. We reinstalled the new body parts over a cleaned and repainted frame. New spring
over steering, new 4:56 gears with front and rear lockers. RS7000 shocks, new 35” cooper STT Pro mud
tires on 15×10 Fuel wheels. Pro Comp front and rear bumpers and a bulldog winch, LED lights, synthetic
winch line, Fabricated in house rollcage. Also installed, New seats, steering wheel, stereo, CB, and racing
seat belts. The swapped in 305 chevy was replaced with a 290 horse crate motor, Zoom racing clutch,
HEI ignition, A power brake upgrade and more. We replaced everything on this jeep other then the
frame, hood, grill and windshield frame. Otherwise we replaced everything!!!
Customer supplied repair and restoration.
Linda contacted us looking to have some work done on her father in laws 66 CJ5. This 34k original mile Jeep had sat for many years and needed the heads rebuilt and head gaskets as well as some overall love. We discussed a budget and started to work. Rebuilding the heads with hardened seals, we also cleaned and detailed the engine compartment, painting the block and ancillary items. Linda originally wanted the Jeep painted, but we discussed the rare and cool factor of the original paint. So onc e she was convinced, we buffed the original paint back to life and sprayed in a color matched bedliner inside
the tub. New seats and a later model rollbar were installed. We painted the front floor pans in gloss black and professionally cleaned the gas tank and painted that with a new sender. Once the underneath was pressure washed we painted the underside. Once the underside was cleaned up we painted the shocks in the original presidential as well as the gas can holders. Few more small issues were repaired and now back in the hands of loving family.
1986 CJ7 Laredo, Owned by Subash, he sent us the Jeep to have a budget oriented “mostly” cosmetic restoration done. This Jeep arrived with a 3″ body lift, lots of aftermarket chrome a set of 33″ tires some bad floor rust issues and a old Maaco paint job. Working within the budget we wet sanded and buffed the older Maaco paintjob, Added new Laredo stickers, removed the body lift, putting it back to factory height with polyurethane body mounts. We also replaced the spring bushings with polyurethane with a set of HD shackles, and new shocks. We cut out and replaced the rusty areas and sprayed the interior in Black bedliner. Reupholstered portions of all three seats while utilizing the factory silver seat stripes. Removed the chrome dash center piece and installed a correct black plastic one with all new vent/def/fan pull knobs and function indicators. With the removal of the body lift we put on the factory correct size and style Goodyear tires, polished the wheels, found a good wheel for the spare, and added new lug nuts to give it that new shine. Repair of the window regulators with new felts and window cranks. Removeing the aftermarket tube steps, chrome brush guard and all the chrome hinges and replaced with factory style parts, gave the Jeep that stock look we were going for. Only using quality materials like pro base factory black with high end clear paint. A new Stainless Steel front bumper was added to finish off that factory look. A tune up, oil change and recharge of the A/C rounded out our budget restoration of this very rare Laredo with automatic, A/C, ad the coveted Dana 44 rear.
2001 Stone White TJ. 4 cyl, 5 spd has never been offroad, Bought this little TJ was bone stock, owned by a 25 year old girl. had a small front end collision, grill, one fender hood, no frame damage and good airbags. I did the repairs added a 2″ tera flex lift, new Rancho (rock crawler) , shocks. (yes they make longer travel TJ shocks) New Steering stabilizer, 5 new US Wheel “smoothies” painted the body color “Stone White”, some 33×12.50×15 BFG’s a 31″ spare, New Bulldog winch front bumper, Bulldog Winch 8k “Bronc” winch with synthetic winch line, New Rocker guards, Optima Yellow top, Throttle body spacer, Air Raid intake. The fender, grill are OEM mopar parts, the hood is a Certa Fit replacement. NEW radiator, A/C is cold, CD player etc. GREAT running Jeep, Drives awesome, Sold here in Arizona. Very nice TJ
Custom built to owners specifications.
Brandon contacted me looking to have a CJ built for him. We came up with a budget and began the process of finding a good starter jeep. A 1985 CJ was found, 90% rust free and had a 6 cyl and a T-176 4 spd that I knew would hold up to the V8 he wanted installed. Once the Jeep was stripped down to bare metal, we removed and repaired all the rust spots and straitened some of the sheet metal, while still maintaining the original CJ spot welds and character that proves to real jeep owners that “this jeep is original”. Brandon choose a 1985 AMC Dark Midnight Blue. Once the engine compartment was sprayed we installed a AMC 360 that we found on craigslist. It had recently had a cam, timing chain and head work done. Being this was the only way to get a V8 within budget. We swapped it in. Brandon wanted a motor he could show at car shows and header and side pipes were a MUST! Well I DO LOVE side pipes, So I happily installed them. We finished painting the body, installed Rock Corners, a 2.5″ lift kit with .5″ lift shackles and new pro comp shocks. New 33×12.50×15 BFG All Terrains on Eagle 589 Wheels. We also Painted the underneath in high temp black. A new gas tank and sender was installed along with the under side work. The floor pans were rhino lined in black and all new Dash pulls, indicators, shift knobs, boots etc. Brandon wanted a hard to find interior color, nutmeg. We found front and rear seats in this color but nothing else. I had a custom vinyl paint made up to match and sprayed some “spice colored” center console, visors, dash pad, speaker pods, grab bar and the YJ door panels. Once all together the Jeep turned out amazing. Fully detailed, Super strong, sounds amazing and drives great. I firmly believe that we removed 95% of all the bolts in this Jeep. Dang near a nut and bolt. Build time was a little over 2 months.
Custom built per owners specs, and only slightly over budget! LOL
Thanks Brandon and enjoy your Jeep. I would be happy to have this one in my garage.
I restored this CJ7 a while back. Pictures kinda got lost in the Jeep Farm archives. Its a original golden eagle V8, automatic, quadratrac. I drove this for a couple of years before selling it. I did a 2.5″ lift kit, 33×12.50×15 BFG All Terrains on some rare Ansen Mag Wheels I found at a swap meet. It was a very nice driver, new gauges and a LeCarra steering wheel PS and PB Jeep. It had a older tan paint job that I buffed out and reinstalled new Golden Eagle stickers on. Honestly I cant remember much beyond that. It did have a nice Magnaflow exhaust on it.
The Jeep Farm, LLC is proud to have just SOLD this amazing Southern California, 52k original mile survivor, 1976 Jeep Wagoneer for sale. This beautiful Pewter Grey with Ocean Blue interior Jeep was a one owner Jeep until the original owners passed away. It was then given to the son-in-law who showed no interest in it. It sat mostly unused for many, many years, only being started and moved when access to the back yard was needed.
I purchased this 100% rust free gem from the son-in-law. It was badly faded but an original survivor, even had two of the original white wall tires on it!
The body was very strait and 100% rust free. It was striped of everything aside from the windows and was primered and sealed with a 2k sealer then sprayed with a premium base plus clear paint in a professional spray booth. Once all the color sanding and buffing was finished (plus my arms), it received new 3M wood grain. All of the chrome and stainless trim was polished and put back on. The chrome is in amazing shape, and the trim is very nice with a few dings on the pieces around the wood grain (please look at the pics). The grill is in very nice shape with only the passenger headlight bezel having a dent in it. I am looking for a new one now. If it does sell before I find one, they do pop up on ebay regularly. The sealed beam headlights were also replaced with Hella H4 Euro headlights. I run these on all my Jeeps. It really makes a huge difference in night driving.
The Ocean Blue interior is largely original. I did replace the carpet with new ACC carpet with custom floor mats that say “Jeep”. I also redid the headliner with new material. The dash and door panels are all original and in amazing shape. The AM/FM radio works great, all interior lights work, wipers, heater, fan, turn signals, back up lights, tailgate switch works. I have not checked the cruise control. I had the A/C professionally charged and works great, blows COLD air. The seats are also all original blue plaid. They are in wonderful shape with only the drivers area showing some wear. (again please look at the pics). The rear cargo area panels are also in great shape, the aluminum strips have been cleaned up and the original jack and parts are included with their original bag!
The Underneath is 100% rust free. The frame and axles have been painted in high heat black. A brand new 3″ lift kit was installed, with 4 brand new Rancho Shocks and a new Ranch steering stabilizer. New U bolts and bushings were also installed. I added 4 original Jeep 5 slot mags (the Jeep originally had hubcaps) and polished them up with very nice center caps. There is also 4 brand new 31×10.50×15 BFG All Terrains with less than 100 miles on them. The spare wheel has been repainted and wears a very nice, but used 31′ BFG All Terrain also.
A 52k original mile 401V8 lurks under the hood. The factory 4BBL has been professionally rebuilt. I also replaced the thermostat and hoses, basic tune up, oil change etc. There is also a new battery and under hood liner. The engine compartment only needed a basic pressure washing, its very original and clean. The previous owner added a secondary ignition box behind the grill with a quick disconnect next to the battery. I have never seen this done and is a great idea. If you have ever owned a Jeep with the Autolite ignition, you understand and are chuckling. This is a great idea, and you will never be stranded. I have tested them both, and they work. The engine runs great, no smoke, has only a very small leak from the drivers valve cover and the rear main does leave a drip on the driveway. I had a brand new 2.5″ exhaust installed from the manifolds back, using a Magnaflow muffler. It sounds awesome!!! nice deep rumble but quiet on the roads. I have installed this on may Wagoneers and on my personal Waggoneer. I LOVE THE SOUND! if your going to get 8 MPG you might as well HEAR IT!!! When you step on “the stupid pedal” passing someone, they will know your wagg does not have the 360… only a 401 makes this sound!!!!
Overall this is a extremely nice Jeep. Runs and drives great, Plenty of power, beautiful paint and a SUPER COOL interior. Pewter Grey with a blue interior! YES! this is not your white bubble car with a tan interior, this is COOL! Cruise this Jeep, go camping, make your neighbors soooo jealous, if they aren’t…. rev that 401 with that GROWL! they will go back inside. LOL
The Jeep Farm, LLC is proud to have just SOLD this sympathetic restoration of a 1977 Jeep Cherokee Chief. Russet Metallic Red, Factory 401, th400, quadratrac, A/C, PS, PB, power rear window with defrost, Class II receiver hitch, Factory option Ramsey 8k winch and bumper, and factory option 3:54 gears with MANY extras.
Previous owners loved this Jeep! the 401 was rebuilt at some point. Mileage on motor is unkown, The Jeep has 165k total, but was towed behind a RV for many years (towing harness incl). The VERY strong 401 has Edelbrock 4 BBL carb, HD batt cables, new coil, wires, plugs, battery etc. All emissions equip is present including catalytic converter (and sticker above drivers visor) Runs like a champ, very strong and honestly the fastest FSJ I have had to date! The th400 was rebuilt also with a deep pan and shift kit. it has a HD cooler in front of radiator with dual electric fans to help move air. She has custom made springs with rears having 8 leaves, front dual shock hoops, with 6 new Rancho shocks and new steering stabilizer. Dual gas tanks with the selector on drivers floor(under floor matt), Swing out spare tire carrier that can latch onto the side of the jeep if you are carrying a load with tailgate down, 4 Brand new (50 miles) 33×12.50×15 BFG All Terrains on powder coated factory wheels (not painted) The spare is a 33×10.50×15 Brand new also (I decided to go with a thinner tire, height is the same) has 4 very nice wheel centers with some minor pitting. Hella H4 Headlight Conversion and New Winch Cable and hook.
The interior has brand new carpet, new custom floor matts, New headliner, Seats have only been redone where needed. New door seals, new window seals, new tailgate seal and window seals. power rear window works as it should, all gauges work, turn signals and wipers work as they should. Dash and bezels are in amazing shape. The A/C blows but, compressor doesn’t click on. Probably low on Freon. All A/C hoses are newer as is dryer and condenser. The Dashboard is perfect! no cracks, ash tray has never even been used. Gauges all work, has Old school 2 post tape player that works. 6×9 door speakers and 6″ round rear speakers (not working). The rear window defrost does not work, strips in glass are worn. The under dash A/C unit is missing the section that goes under the column (keep an eye on ebay, they do show up forsale). Otherwise perfect interior.
The body is 95% rust free. It has had one repaint in its original color at some point in its life. I redid the black portions and stickers and buffed the heck out of it. There was some rust in the rear flares (lower tips only) and floors that I could tell have been repaired in the past. (not much at all). You cant even see any areas from underneath. I sanded any pitting on floors, coated in “rust dissolver” then painted with a sealer paint. I also lined the cab areas with high end sound deadener. The paint shines very well. However not perfect. Has chips and scratches. There is a long scratch down drivers door (look at pics) and a stress area with chips on pass rear quarter. I am sure from the stress of the tire carrier (again look at pics). I have made a reinforcement plate for the latch area on tailgate (look at pics) and the lower hinge also needs a internal reinforcement plate made. There is “checking” on the roof and a spot on the hood, scratches and chips. Looks amazing till your right up on it. The doors seem to stick out a bit at the bottom, this is due to BRAND NEW door seals. Once they compress a bit the doors will sit flush (I promise….Well Jeep flush….so pretty close..lol)
This is a rare highly optioned Cherokee Chief! and a rare opportunity to own it. The 401 sounds healthy, no smoke or issues, runs SUPER strong and truly faster than any FSJ’s I have had…..and Ive owned a few…. The trans shifts strong and drives strait and true. Brakes, steering, cooling all work as they should. Awesome color and seat patterns.
WOW! Where do I start? Frame off resto. 22k original mile jeep. Arizona native jeep. Found with original paint and tailgate stencil! look at pics. 225 dauntless V6, 3 spd. and dana 18 Transfercase. Axles rebuilt, locking hubs, New everything. New wiring, Brakes rebuilt poly body bushings. Body stripped to bare metal and repainted the original color “glacier White” with “presidential Red” wheels. 4 Brand new 6.00×16″ tires with an original Dunlop spare. Restored wheels, restored speedometer. New stickers, New winshield Glass. all new all new. AMAZING Jeep. The V6 has tons of power and drives strait and turns heads. A true collectors dream.
96k original mile Arizona Jeep. Found in northern Arizona ALL original paint. New Cherokee tribal stickers. New carpet and headliner. Seats were all original. Rebuilt in-house 360, Eldebrock intake and carb, TH400 and quadratrac. Detailed engine compartment. Original NOS stickers for engine. 3″ lift 31″ tires on factory restored wheels. 1.5″ wheelspacers to give it a wider track. All new lenses and interior light covers. Amazing Jeep sold to new owner in Belgium. A true piece of Americana.
True Arizona survivor. Wedgewood Blue, One of the Highest Optioned 79 CJ’s I have ever seen. Dealer Installed Warn 8274 Winch with AMC Logo on top with a NEW synthetic Winch Rope. Factory Side steps, Clock, Tach, Tilt, Power Brakes and power steering. Was even an original A/C Jeep. (however all components are gone). Originally had LEVI blue denim interior, Sadly that’s gone also. BUT very nice and newer grey highbacks and custom carpet. NEW grey dash pad and visors. A very strong 304 V8 , 4BBL with edelbrock intake, rebuilt TH400 (less than 500 Miles) Trans Go shift kit and new torque converter. Quadratrac with NEW part time kit. Superior one piece axles, rear POSI, New locking Hubs. NEW 2.5″ Rancho lift Kit. New Shackles, New RS9000 Adjustable shocks, NEW steering stabilizer. Alpine CD player and Alpine 6×9 speakers. BRAND NEW (less than 500 miles)33×12.5×15 BFG All Terrains (5) and BRAND NEW Pro Comp 15×10 White wagon wheels (5). NEW fender flares and windshield gaskets. Hooker side exit headers and Turbo Mufflers. Sounds so 70’s. BUT quiet unless you put the throttle down Then she sounds MEAN…. This jeep was wonderfully maintained by previous owner. All original Paint and stickers. ABSOLUTELY NO RUST!!! And super strait body. Stickers are faded and the paint is thin in areas but shines great and has that perfect patina. Nice white hard top and doors. Also Included is a bikini top. This Jeep is one of the most amazing ones I have ever had. Drives 70mph strait as an arrow (hard to believe but true) rides great and one of the most rattle and squeek free jeeps I have ever owned. . .. Plenty of pep in the V8 and that soooo cool vintage look of the white wheels and white letter tires with the white hardtop and that side pipe sound!!!
A Truly wonderful Jeep.
Built 360 with RV cam. Eldebrock intake and 4BBL. Aluminum radiator. Mile Marker part-time kit in Quadratrac with 18% overdrive. Full-length headers. 3-inch exhaust. Magnaflow muffler. 4-inch BJ’s off road lift-kit. SS brake lines. Restored wheels. 31-inch GeoLander tires. Matching spare. Reupholstered front seats. Recent carpet headliner. CD player. 6-inch Infinity speakers. Tinted windows. $750 winch bumper. 10k Bulldog winch. Custom made roof rack(wired for lights). $4,000 paint and new woodgrain. Amazing driver. Exhaust sounds amazing. Ready for driving, camping, and whatever you want to throw at it. Always gets comments and thumbs up wherever you go.
This old beauty is a original Arizona jeep. Avocado Mist Green with a rebuilt Buick 350 (factory) a TH400 Automatic Transmission and Dana 20 transfercase. Brand new 2.5″ exhaust with a Flowmaster muffler. (sounds MEAN). I just installed a 4″ lift made by Alcan spring (one of the best in the business) with all new Rancho Shocks. From my private stash of parts, I installed a set of original vintage 60’s Kelsey Hays 15×9 wheels (the riveted ones). Had them powder coated white, for that vintage 60’s look. New 31×10.50×15 Falken Wild Peak tires. The Interior is in amazing shape. Original headliner and original dashboard. New carpet with custom floor mats. The front seat was stitched to match the original rear seat. It was completely rebuilt with new springs and padding, but using the original material on the seat back. Also from my private stash, I mounted a rare Warn winch bumper that is going to get a original 60’s Warn/Bellview winch.
The floors are in great shape, there was some rust pitting, but this was sanded and treated with a rust inhibitor and painted. There is a small spot of rust behind both rear tires. I have the patch panels and can do the repairs and repaint that area with matching paint.
Sympathetic restoration. 258 six, Weber carb and aluminum valve cover, aftermarket coil. 4spd and Dana 300 transfercase. 90% original paint. New windshield frame. New seats and new dash pad. Uncut, original dashboard. refurbished door panels and visors. New Renegade stickers over original Chestnut Brown paint. Smittybuilt bumpers, KC lights, 4″ procomp lift, procomp shocks, warrior shackles. Steering box brace and new steering stabilizer. Lecarra steering wheel (or original if you choose) 33″ procomp x-terrains on aluminum wheels. All new lenses and lights. Hardtop with new paint. Bikini top and half doors included. Front and rear axles have new bearings and seals, new ball Joints. Was towed behind RV for many years, odometer shows 180k miles, but jeep has probably less than 70k under its own power. Still has all wiring connections for RV lights. Runs and drives great. Looks the part too.
Colorado rusty bucket, however, deluxe model with factory Julip Green paint and factory plow. How could you not love her? Hurricane straight 6. 43k original miles. Interior completely restored(seats, headliner and door panels). All gauges functioning. New floor pans, springs and shocks. 32 Ford LED taillights. Rubber bed mat. Rhino lined floors and roof. New trim. Restored wheels with used tires. Awesome runaround vehicle and total eye-catcher. Sold to proud owner in Langley.
84k original mile Arizona beauty. Rare Sunshine Yellow. Sold to new owner in Missouri. 360 AMC TH400 auto with quadratrac. F/R Dana 44’s original restored wheels and paint. New woodgrain and tires. New upholstry, headliner and carpet. Cold A/C, great driver and truly my favorite so far and become the logo for The Jeep Farm.
1979 Jeep CJ5 hot rod. Has brand new BUILT, FULL TILT AMC 401. Also has Comp Cams Thumper Cam, 1.6 roller rockers, double roller timing chain, oiling upgrades (internal), Fluid dampner, big vlaves heads, Edelbrock intake, Holley Truck Avenger, Moroso oil accumulator set up on toggle switch. Has internal -6AN to take oil to back cam bearings. Has a steal mid plate and new HP oil pump. (mid plate is so oil pump gears ride on steal, rather than aluminum) vacuum canister for power brakes. Powermaster high torque starter. DAVIS UNIFIED DISTRIBUTOR and wires (over 500.00 alone), Show quality, headers, sidepipes. WAY fast and loud. Sounds like a drag car. Does not overheat or even run warm. T-18 trans with Dana 20 transfercase. 30 front with ARB, 20 rear with ARB, HD ARB compressor with tire chuck, and hose to air up tires. Old school Sommers Bros Axles in rear. 4:56 gears, roll cage, NEW seats, New Guages, NEW steal rockers and rear wrap with rivets. LED lights 5 NEW General RED LETTER tires. 33/12.50/15. 5 NEW Mickey Thompson wheels. HD steering box mount, NEW Rancho 9000k shocks, taller shock mounts on front. Louvered hood. Hella headlights. Optima battery. Black Bestop Supertop. OLD school Ramsey 12,000 lb gear drive winch. OLD school hard to find KC lights. ( these really are the old housing and lens.. Not your normal chrome KC’s)Ready to roll. Rock crawl or the dunes. This jeep has tons of POWER. and sounds bad ass. TRUST me you will be hard pressed to find another CJ that sounds or moves like this one. Sold to proud new(and brave) owner in El Paso, TX.
Sold to country music singer/songwriter Chris Stapelton.
This Massachusetts transplant has only 77k Original Miles. 360 V8 2 BBL, Auto and quadratrac transfercase. Purchased by Country Singer and song writer Chris Stapelton. This Jeep had not moved since 1999 due to a bad transmission. I rebuilt the transmission, New carpet and New 31×10.50×15 BFG all Terrains on restored wheels. (not pictured). Original paint and stickers, original seats, headliner and dash. The gas tank was dropped and sealed with a new sending unit, carb rebuilt and basic tune up. Other than that it is all original. Has some bubbling around tailgate hinges and lower quarters.
Chris purchased this Jeep Flew out to Arizona with his wife and videographer Becky Fluke. They drove the Jeep all the way to Georgia and back to Memphis TN!!! what a journey. In a Jeep that hasn’t seen 50 miles since 1999!!! And they MADE IT! only suffering a dead battery in Texas. We look forward to seeing parts of this jeep in his upcoming music video… we hope. He has become a Jeep fanatic and is looking for a Golden Eagle J-10 to add to his collection.
Very Nice 1984 CJ7 Renegade. 118k original miles. Has a clean and clear Arizona title. The title is an “A” title. For you non Arizonians this means it is documented and original. I purchased this jeep in southern California. The previous owner put a NEW 304 V-8 with a very healthy RV cam, has a full folder of receipts. She has dual exhaust with Flowmaster mufflers and sounds mean. (There is a video on my website) The 304 has between 8-10k miles and runs extremely strong and is very lopey at idle. The auto trans has been flushed and shift great, followed up with a Dana 300 transfer case. There is a 4” Superlift lift kit with Doetch Tech shocks, BRAND NEW 33×12.50×15 BFG all terrains (5) less than 300 miles. I pulled out of my personal stash 5 correct Jeep wagon wheel with center caps and new lug nuts. The tub is 100% rust free and strait. I put a NEW repro (not junk yard) hood on it. The original is avail but dented due to a tree branch. There is also an aftermarket steering box and steering shaft. NEW CD player and dash speakers. NEW dash pad and temp and oil pressure gauges. The V8 has great oil pressure, 70lbs at start and runs 20-40 when hot. There is a new radiator and no overheating issues. It runs 190deg in phoenix when it was 114 deg outside. The interior is basic with two high back seats and a Tuffy console (no back seat) and a full roll cage. There is no top other than the bikini top.
This jeep runs awesome, has plenty of power and drives strait and true at 70 MPH and sounds BAD ASS!!!!